Ding HeRequest a quoteQuote

PTFE Film: Rolls, Tape and Enquiry Support from Ding He

Ding He supplies PTFE film, PTFE film tape and PTFE film rolls as part of a wider film range that also covers PET, PE, CPP, BOPP, VMPET, PVC and polyimide. The factory in Lin’an, Zhejiang, slits and converts films for industrial buyers.

Request a quote for this structure

Thickness
0.05-0.25mm
Width
4-200mm
Color
Customizable
Narrow PTFE film tape rolls

PTFE Film: What It Is and What Ding He Supplies

PTFE film is a fluoropolymer film, and industry selects it for low friction, chemical inertness and a wide service-temperature range. It is a plastic rather than a rubber, with a surface that other materials do not readily bond to, so it appears where parts must slide, where a face has to resist aggressive media, or where a stable electrical barrier is wanted. Buyers use it as a sliding layer, a gasket facing, a non-stick interface and an insulating web.

Ding He’s film range includes PET, PE, CPP, BOPP, VMPET, PVC, polyimide and PTFE, and the company offers PTFE film, PTFE film tape and PTFE film rolls. Neighbouring films are quoted on the same desk: PET film and polyimide film serve other duties in a project. Send thickness, width, structure and colours through the enquiry form or call +86 139 6803 3581 so the request can be reviewed against the build your process needs.

  • PTFE film
  • PTFE film tape
  • PTFE film rolls

PTFE film specifications

PTFE film specifications
ParameterValue
Thickness0.05-0.25mm
Width4-200mm
ColorCustomizable
Film AdvantagesExcellent fire resistance and insulation, High flexibility, resistance to chemical corrosion, outstanding dielectric properties, extremely low permeability

Skived PTFE Film: Ask About Feasibility

Skived describes a way a film may be produced rather than a separate product Ding He lists. A request for PTFE skived film is handled as a feasibility check: the buyer states thickness, width, structure and colours, and the request is reviewed against the work the lines can run. Skived PTFE and PTFE skived film mean the same request, so both arrive under this shared heading and receive the same review.

The enquiry carries the detail that makes the review useful. Upon a detailed product request covering thickness, width, structure and colours, Ding He can prepare samples with a technical data sheet. Where a stated build falls outside the processes available, the sales team says so and discusses what the film range can offer instead.

Teflon Film: A Trade Name for PTFE Film

Teflon is a trademark name commonly used generically for PTFE, so a buyer searching for teflon film is normally looking for PTFE film. The properties sit in the same family: low friction, chemical inertness and a wide service-temperature range. Ding He’s film range includes PTFE, and PTFE film, PTFE film tape and PTFE film rolls are offered.

Requests written as teflon film are reviewed on the same basis as PTFE film requests. Send thickness, width, structure and colours, and the team checks the build and prepares samples with TDS where the request allows. Other films such as PVC film and CPP can be quoted in the same enquiry when a project needs more than one web.

PTFE Film Rolls and PTFE Film Tape

Ding He offers PTFE film rolls alongside PTFE film and PTFE film tape. Rolls are supplied as roll stock for industrial conversion, and slitting runs on fully automatic, high-speed CNC slitting machines of German origin. A teflon film roll is the trade-name phrasing of a PTFE film roll, and both are handled in the same way.

Send thickness, width, structure and colours so samples with TDS can be prepared and a quotation built. Ding He replies to inquiries within 1 working day. Lead time differs by product and order quantity and is confirmed for each order. The minimum order depends on the build, and trial quantities are possible for new projects. Payment is by T/T, L/C, D/P, D/A, Western Union, MoneyGram and PayPal, and shipping runs from Shanghai port, Ningbo port or another port the customer prefers.

Rolls and tape are quoted from the enquiry form, the sales phone line or a message through the contact page, with the build details attached to the request.

PTFE Release Film: Confirm Your Application

PTFE has a low surface energy, and that non-stick character is why buyers ask about release uses: moulded parts, heat-sealing bars and press platens lift away from it cleanly. Suitability for a release application is confirmed against the buyer’s request rather than assumed from the material alone, because the contacting material, the pressure applied and the temperature cycle all shape the result.

An enquiry covering thickness, width, structure and colours lets the team review feasibility and discuss samples. Where a project needs a broader construction, Ding He laminates and coats films on its own lines, so the request can be weighed against the processes available and answered with the nearest workable option.

How an order runs

Send your specification
Structure, layer thicknesses, roll width, core size and the quantity you need.
Samples
Samples with a technical data sheet can be discussed for your evaluation.
Order and payment
Payment by T/T, L/C, D/P, D/A, Western Union, MoneyGram or PayPal; the minimum order depends on the product and build, and trial quantities are possible for new projects.
Production
Lamination, coating and slitting to width; the lead time differs by product and order quantity and is confirmed for each order.
Inspection and shipping
Third-party inspection by agencies such as BV or SGS can be arranged; shipment from Shanghai port, Ningbo port or another port you prefer.

Request a quotation

Tell us the layer thicknesses, roll width and quantity for this structure.

Or write to sales@foillaminates.com

* Required