Radiant Barrier Foil for Industrial Insulation and Duct Buyers
Ding He manufactures ultra-thin aluminum laminate materials for insulation, duct and cable customers. Radiant barrier foil is an aluminum foil laminate used to reduce radiant heat transfer. Send application details for a build recommendation.
- Production lines
- 5
- Minimum order
- depends on the product and build

Radiant Barrier Foil and Radiant Barriers
Radiant barriers are low-emissivity surfaces that limit radiant heat transfer. Aluminum foil laminates are used in building, duct and pipe insulation where a reflective surface and barrier layer are needed. Suitability depends on the full laminate build and on installation, so the application conditions guide the choice.
Ding He supplies aluminum foil laminates to insulation makers, HVAC duct producers and cable shielders. For foil radiant barrier insulation, the laminate build, substrate, environment and handling needs decide the construction. Share the intended use, reflective surface protection and installation method so the laminate can be reviewed against the project rather than a single format.
Before ordering radiant barrier foil insulation, check the intended use, laminate structure, reflective surface protection, installation method and required documentation. Ding He accepts third-party inspection by agencies such as BV or SGS and replies to inquiries within 1 working day. Send the specification for review, including the substrate and the way the foil will be handled on site.

Woven-fabric foil facing rolls
Radiant barrier foil specifications
| Parameter | Value |
|---|---|
| Structure | AL/Non-Woven Fabric |
| Aluminum Foil Thickness | 7–30 μm (customizable) |
| Non-Woven Fabric Weight | 15–150 g/m² (customizable) |
| Width | Up to 1500mm (custom roll width available) |
| Color | Customized color for non-woven fabric surface |
| Film Advantages | Light in weight, Breathability, Soft Touch |
| Parameter | Value |
|---|---|
| Structure | AL/PE Woven Fabric |
| Aluminum Foil Thickness | 7–30 μm (customizable) |
| Width | Up to 1200mm (custom roll width available) |
| Film Advantages | Light in weight, Breathability, Soft Touch |
Foil Insulation and Reflective Foil Rolls
Foil insulation uses an aluminum foil laminate to reflect radiant heat and can add a barrier layer. Performance depends on the laminate structure and installation. Ding He supplies insulation makers and duct producers, and reviews the application conditions before recommending a build. Use the specification table alongside the project requirements.
Roll format and dimensions depend on the laminate build and order. Buyers planning production or converting lines can enquire about roll feasibility, width, core and quantity for insulation foil rolls. Ding He can review a request against the chosen laminate instead of treating one reel format as a standard supply for every project.
Reflective foil insulation targets radiant heat rather than only conductive heat and relies on correct installation with air spaces. It can be combined with other insulation in ducts, buildings and pipes. Project details help select a laminate; Ding He works from the assembly and handling needs rather than a single performance claim. Share the construction and air space for review.
Reflective foil is an aluminum foil laminate with a reflective surface for insulation and barrier uses. General uses include duct wrap, pipe insulation, building insulation and cable shielding. Related constructions include AL/PET film, FSK facing, vapor barrier foil and flexible duct film. Send the required laminate and application for review.
How a Heat Radiant Barrier Works
A heat radiant barrier works by presenting a reflective aluminum surface to radiant heat transfer. The surface reflects radiant energy rather than absorbing it and passing it through the laminate. The barrier effect depends on surface condition, air space and installation, so the same foil construction can behave differently in different assemblies.
In ducts, roofs and pipes, the reflective surface is normally part of a laminate that also provides a barrier layer or mechanical support. Ding He laminates, coats and slits aluminum foil materials for these industrial uses; the build is selected from the application, not from a measured performance claim. Share the assembly and conditions for a laminate recommendation.
Ding He was established in 2001 and updated its production line and machinery in 2020. Its factory at Yangling Industrial Park, Taihuyuan Town, Lin’an, Zhejiang Province, covers 3,000–5,000 m² and employs 11–50 people. Coating and lamination lines run at an annual capacity of around 10,000 tons. For a heat radiant barrier project, send the substrate, environment and installation details so the laminate can be reviewed.
How an order runs
- Send your specification
- Structure, layer thicknesses, roll width, core size and the quantity you need.
- Samples
- Samples with a technical data sheet can be discussed for your evaluation.
- Order and payment
- Payment by T/T, L/C, D/P, D/A, Western Union, MoneyGram or PayPal; the minimum order depends on the product and build, and trial quantities are possible for new projects.
- Production
- Lamination, coating and slitting to width; the lead time differs by product and order quantity and is confirmed for each order.
- Inspection and shipping
- Third-party inspection by agencies such as BV or SGS can be arranged; shipment from Shanghai port, Ningbo port or another port you prefer.
Request a quotation
Send the product, structure, thickness, width and order quantity.
Or write to sales@foillaminates.com